Woodworker video compilations | WoodWorking Videos

Field Editor Chris Marshall looks at many of the Multi-Tool ...
Posted by: WoodworkersJournal

Video duration: 401 seconds
Global video hits: 1034/div

Field Editor Chris Marshall looks at many of the Multi-Tool models and attachments currently on the market. Read his full article in the March/April 2010 issue of Woodworker's Journal magazine, available at your local newsstand or woodworkersjournal.c om

Related: woodworking, woodworkers journal, fein, multimaster, supercut, craftsman, nextec, dremel, multi-max, bosch, multi-x, rockwell, sonicrafter, multi-tool, diy

Display Video Comments | Hide Video Comments | Add Comment

WOODWORKING - Flame Finial - Part 1
Posted by: InTheWorkshop

Video duration: 541 seconds
Global video hits: 23214/div

Woodworking is my passion. Having taught many woodworking classes, I found that my woodworking students were terrified of using the standard aluminum taper jig so many years ago I began using a less refined version of this jig in my woodworking shop and when teaching woodworking classes....

Related: woodworker, woodworking, charles, neil, furniture

Display Video Comments | Hide Video Comments | Add Comment

WOODWORKING - Jointers - Setting Using
Posted by: InTheWorkshop

Video duration: 615 seconds
Global video hits: 20208/div

Charles Neil shares some tips on setting and using aa jointer. Happy Woodworking and Be Safe! woodworking, woodworking, woodworking woodworking, woodworking, woodworking woodworking, woodworking, woodworking woodworking, woodworking, woodworking woodworking,...

Related: woodworking, woodworker, charles, neil, jointer, jet

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

What a great set of ...
By: caseymiller82. on 02 Mar 10, 15:27:56
What a great set of videos! Thank you Charles Neil very much for sharing.

Thanks for being so ...
By: MrLanging. on 29 Dec 09, 19:51:49
Thanks for being so thorough. As a beginner I use an old Craftsman I rebuilt (it was trash). Its fence is incomplete (no lockdown mechanism) and normally isn't square with the blade, so every cut I make I have to measure it from each side of the blade and then clamp the other end of the fence with a C-clamp, and pray it doesn't move during a cut. You are so lucky to have a real table saw!

steve, i do not ...
By: InTheWorkshop. on 24 Nov 09, 13:57:11
steve, i do not have one on Radial arm saws...maybe one day...they have a tendency to be a little unsafe, i much prefer a table saw

Do u have any ...
By: steveho75. on 24 Nov 09, 01:32:08
Do u have any videos of Radial Arm Saw videos of demo and cutting and setting up. Steve

thx for uploading ...
By: BobaFett379251. on 19 Oct 09, 05:14:34
thx for uploading that video tat will help me catch up to what ive missed the past couple of days in woodshop class

actually what i do ...
By: InTheWorkshop. on 30 Jul 09, 17:24:06
actually what i do is to keep pressure on the back as i start thru then transfer my pressure to the front after i reach the halfway point, if i am jointing something that has a ggod size bowin it and i am forced to joint it with the bowed side down the above will not work, in this case i keep the pressure on the infeed side ( starting side)...

Thank you for ...
By: jkeaton683. on 30 Jul 09, 16:49:01
Thank you for sharing your talent with us..Beautiful work!!! I been milling my own wood now and started to get in to wood work..I hope you dont think this is a stupid question,,but I keep hearing diff. things about the best way to run a piece tru a jointer and I'm kinda confused...Is it best to put pressure on the front of the table *as soon as your piece touches it* or the back of the table runnin a piece tru..I just wanted your thought what you do....Thanks again..I learned alot frm your vids!

man oh man....if ...
By: InTheWorkshop. on 30 Jun 09, 23:58:13
man oh man....if you only knew...it takes me more time to clean up the area just to film, than to do the vid......I roll...thanks for all the comments

i dont trust anyone ...
By: umcosta. on 30 Jun 09, 23:13:16
i dont trust anyone with a clean workshop.

i never use safety ...
By: robertcar38. on 17 Jun 09, 00:43:09
i never use safety guards on my table saw, ther is a point were is is to cumbersome

One of the finest ...
By: netjem. on 24 Feb 09, 22:21:25
One of the finest wood workers. Bar none.

I couldn't have ...
By: C3DesignBuild. on 03 Nov 08, 08:08:59
I couldn't have said it better, my friend! I find myself sitting in front of the pc (on countless evenings) watching vid, after vid, of his tutes...and saying outloud, "Man...this guy is good"....LOL! Cheers!

After watching many ...
By: tritrek. on 15 Aug 08, 14:09:25
After watching many many of Charles' videos the only thing that comes up my mind is that he is the best old school, yet modern woodworker I've ever seen. Simple, on topic and entertaining. Bravo! I love these vids...

WOODWORKING - Cutting Thin Strips on the Table Saw
Posted by: InTheWorkshop

Video duration: 327 seconds
Global video hits: 79566/div

Latest comments made on this video:

Instead of moving ...
By: andersonec1. on 13 Mar 10, 01:53:59
Instead of moving the fence for every cut, why don't you take the strip you have just cut and place it between the stock and fence and do this with every strip cut, that way the stock moves over the exact width of the strip just cut.

Great vid. Thanks.
By: VinnyKnuckles. on 07 Mar 10, 18:39:15
Great vid. Thanks.

Thank you Mr. Neil ...
By: camdenbuck. on 20 Jan 10, 19:29:27
Thank you Mr. Neil for posting such an informative video. I just picked up some tools and trying to get information on all of the safety issues as well as some tips. Your presentation has been very helpful.

So much for using ...
By: larrybud. on 22 Nov 09, 01:26:59
So much for using the push stick!

got the magnets at ...
By: InTheWorkshop. on 29 Sep 09, 00:58:21
got the magnets at woodcraft a couple yeas ago..alot of folks now carry them

Not familar with ...
By: inohim. on 29 Sep 09, 00:40:28
Not familar with the twist magnets are that you were using. Can you tell me more about them? I like your guard contraption.

top notch video man ...
By: emutiny. on 31 Aug 09, 23:07:10
top notch video man. excellent tutorial, clear instructions. I think amatuer woodworkers and diy'ers as well as professionals can understand your direction. Also 5 stars for citing your reference! Alright ill go rip some strips now!

I have one in my ...
By: michaelait. on 07 Aug 09, 02:46:09
I have one in my shop. I got the idea from Mr. Kaufman as well. It works great. Thanks Mr. Kaufman and Mr. Neil.

i agree. that's ...
By: r32adt3db. on 13 May 09, 05:19:44
i agree. that's great he gave original credit to the person that invented the technique.

I hate pulling the ...
By: walikai. on 03 May 09, 02:33:09
I hate pulling the thin strip away from the blade.

Thanks Charles, ...
By: trumpetflowerII. on 25 Apr 09, 10:30:18
Thanks Charles, the are few honourable people left in this world and it's nice to know the name of the person who originated this technique.

awesome. really ...
By: melonheed3. on 03 Mar 09, 05:46:01
awesome. really useful for luthiers who often need to mill thin strips, sometimes mililmeters wide. im gonna pass this vid on to some people.

god bless you
By: jws54. on 08 Jul 08, 08:42:57
god bless you

Thanks to you and ...
By: t44florida. on 18 Jun 08, 04:16:25
Thanks to you and Mr Coffman. Always wondered how to do this Safely.

Well done! Thank ...
By: 21Casey50. on 19 Jan 08, 18:18:32
Well done! Thank you for your time.

Great demos - ...
By: calism23. on 06 Jan 08, 17:15:28
Great demos - thanks for your time

I built the same ...
By: michaelait. on 01 Jan 08, 15:41:46
I built the same jig and it works great!

Boy, that is what ...
By: MikeElwell. on 31 Dec 07, 07:50:40
Boy, that is what YouTube is all about! Great demo easy to understand. Thanks. Mike Elwell Gig Harbor WA

Nice Charles. I ...
By: EagleLakeWoodworking. on 10 Dec 07, 02:23:53
Nice Charles. I especially like how you gave credit to the person who wrote in the tip - It shows that you're a first class guy.

Sorry for the dealy ...
By: InTheWorkshop. on 27 Oct 07, 20:11:41
Sorry for the dealy in answering,I got them at woodcraft.

Charles, Thank you ...
By: pdschu. on 11 Oct 07, 01:39:03
Charles, Thank you for your considerable effort in putting together your video series. I would like to know where you got the "twist magnets"? Thanks.

Thanks I learned ...
By: outakontroll. on 18 Sep 07, 03:39:56
Thanks I learned some thing new, I also liked that blade guard.

Charles - Nice demo ...
By: Dave51262. on 23 Aug 07, 17:02:29
Charles - Nice demo. I liked the idea and the blade guard with magnets was a great idea too. Thanks!

WOODWORKING - Correct a Twisted Door
Posted by: InTheWorkshop

Video duration: 186 seconds
Global video hits: 29337/div

Charles Neil and Bob Kloes give you a quick tip on how to correct the twist in a door. This technique can be used on chest or box lids as well. Happy Woodworking Be Safe! www.antiquesbuiltdai ly.com woodworking, woodworking, woodworking, woodworking, woodworking, woodworking

Related: wood, woodworking, woodworker, charles, neil, intheworkshop

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

This happens ...
By: holdemstacy. on 04 Jan 10, 18:02:01
This happens secondary to change in moisture inside the wood. Usually with wood bought in from a different climate. It can be helped by letting the wood cure in it's rough shape in the shop where it will be built before working it. I have read where some luithers (however you spell guitar builders) even go as far as to bring their pieces into their homes at night for that very reason. Western / dry states have prob. with this. Test the wood for humidity/moisture and then your shop.

Great tip. Bob was ...
By: calism23. on 27 Sep 09, 16:29:38
Great tip. Bob was right.

man that was ...
By: tanahasan. on 06 Sep 09, 22:04:29
man that was aaaaaaaawesome. ...NOT

I'm sorry, but for ...
By: shark408s. on 24 Aug 09, 17:37:50
I'm sorry, but for anyone saying thay Charles craftsmenship is bad because he's had to use this technique many times, is a complete fool. You can have the straightest peice of wood, jointed, and planned, then rip it, and it will throw a curve right back in to it. It could be clamped dead on straight, and things like that will happen. That's why there are little tricks like this one.

you could try an ...
By: rileesdad7. on 25 Feb 09, 02:25:51
you could try an old trick of mine . drill a hole in the length of the rail . Then put in a peace of pencile rod bent slitly off in the opposite direction. make sure to measure carefully and bevell edges . then plug.

Mr Neil you're an ...
By: zapatista512. on 15 Feb 09, 01:50:14
Mr Neil you're an awesome woodworker.. I'm sure you already know that :)

no offense, but if ...
By: murrmac. on 11 Feb 09, 01:35:30
no offense, but if you have had to do this "many many times", it doesn't say much for your manufacturing abilities. surely you should be looking to machine the components dead straight and square (and out of dry, straight grained quarter sawn lumber) so that when glued up the workpiece is truly flat ? this method, assuming it does actually work will only work when the wood is in the white, once you have applied a finish, you're fcked ...

cool tip!
By: JCESTRIPING. on 03 Jan 09, 02:03:35
cool tip!

LEGEND
By: intbn. on 16 Dec 08, 16:04:04
LEGEND

GREAT TIP!!!!!!!!!! ...
By: ZipSnipe. on 25 Oct 08, 14:19:31
GREAT TIP!!!!!!!!!! THANX

wood is always ...
By: InTheWorkshop. on 02 Aug 08, 13:41:36
wood is always subject to moving,,this has worked for me for 20 + years..the key is to get it wet enough,and to over bend it and let it dry thoroughly ...I have done it many many times, sorry but experience has show it does work.

this won't work and ...
By: bp092. on 02 Aug 08, 00:42:19
this won't work and I doubt if they tried it that it lasted much time.. divided light doors like that can twist for a number of reasons, mainly because they are clamped up wrong and not clamped flat. If they are clamped flat and twist anyways its likely because you aren't using properly dried wood and your shop has poor humidity and temperature conditions. Even if this video method worked for them, I doubt it lasted, once a door twists up you won't be able to get it perfectly flat again.

However, after ...
By: slaintedan. on 22 Jan 08, 16:02:39
However, after spraying with precatalyzed lacquer a couple of the doors twisted, which resulted in the lower corners sticking out proud of its neighboring door (which didn't twist at all - strange given that they were cut from the same piece of wood). The doors are already finished so I can't steam/wet them. I tried "bending" them back into shape, but to no avail. Any suggestions? Did the lacquer cause this?

I've got one for ...
By: slaintedan. on 22 Jan 08, 16:00:33
I've got one for you... I recently built a console out of Birch "multi-ply" featuring 4 doors (2 sets of double-doors) below 4 drawers. All door and drawer faces were cut from the same piece of Birch plywood so the grains match perfectly....

Great subject you ...
By: kksw9. on 08 Dec 07, 00:49:06
Great subject you covered! You are a great team. Can't wait to see more of Bob and Neil!

WOODWORKING - Rubbing Out a Finish - Part 1
Posted by: InTheWorkshop

Video duration: 502 seconds
Global video hits: 11926/div

Charles Neil demonstrates "rubbing out" a finish using a sanding technique. Happy Woodworking and Be Safe! woodworking, woodworking, woodworking,woodwork ing, woodworking, woodworkingwoodworki ng, woodworking, woodworkingwoodworki ng, woodworking, woodworkingwoodworki ng, woodworking, woodworking

Related: woodworking, woodworker, charles, neil, finishing, furniture, rubbing, out

Display Video Comments | Hide Video Comments | Add Comment

carvewright Woodworking System
Posted by: CarvedIt

Video duration: 304 seconds
Global video hits: 74209/div

Instructional demo for the carvewright Woodworking System.

Related: carvewright, compucarve, router, cnc, wood, woodworking, woodwork, woodworker, bit, computer, controlled, memory, card, probe

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

The piece of wood ...
By: curbbit. on 06 Dec 09, 19:48:23
The piece of wood can be 5 inches thick BUT you can only carve to the depth of the sharpened part of the bit which varies between bits but roughly 3/4 of an inch

Its stated that it ...
By: terrance217. on 08 Nov 09, 22:14:00
Its stated that it has a 5 inch depth capacity, however the video shows a limited hight as far as bit clearance. Whats the actual maximum height of clearance for wood working? Say 21/2 inch??

adam west?
By: JAROSLAVAGINA. on 21 Oct 09, 23:38:46
adam west?

OH MY GOD I'M GONNA ...
By: exortus. on 21 Mar 09, 07:36:22
OH MY GOD I'M GONNA BUY ONE!

Hey, good vid. ...
By: FreeWoodCatalog. on 16 Dec 08, 05:55:38
Hey, good vid. Thanks for sharing.

I think it's cool i ...
By: slapjack2000. on 30 Jun 08, 23:11:53
I think it's cool i do wood turning and im always looking for new ways to do it faster or better. This is a tool it won't hurt your hobby or trade skill. If you want to do it the hand crafted way that's fine too. Don't let a machine scare you.

This comment is for ...
By: DudBuster. on 03 Jun 08, 01:56:09
This comment is for 42guitars: I don't mean to sound like a complete jerk, so please don't take this as harsh at it may sound. I fail to understand why you do not consider a product from a person who owns one of these machines a piece of art... Just because a machine carves the final product? Does the user not create the item before it is carved? I am sure there are many graphic artists that would argue that something they created on the computer and printed out would still be considered art.

what a piece of ...
By: 42guitars. on 05 Apr 08, 03:33:32
what a piece of shit ive been carving for over 20 yrs professionally and self employed doing this craft you want to carve go buy some gouges and learn ooh by the way i own a printer does that make me a artist when a picture comes out crap!

mypassionss, you ...
By: carbons4. on 17 Mar 08, 16:53:19
mypassionss, you are one sad little man.

What? One word, ...
By: CarvedIt. on 03 Mar 08, 22:41:37
What? One word, coherence.

LOL... what a crap! ...
By: MyPassionsss. on 01 Mar 08, 20:51:23
LOL... what a crap!This is for "sunday" do-it-yourself enthusiast,nothing more.

Is that Batman ...
By: danmst3k. on 21 Feb 08, 19:02:15
Is that Batman doing the voice over?

This is done by all ...
By: jonm38. on 20 Dec 07, 01:21:56
This is done by all companies. Just like your Gateway Computer is made by Jabil Circuits in St. Pete, Fla then shipped to Mexico.

The Sears ...
By: CarvedIt. on 14 Dec 07, 21:21:44
The Sears CompuCarve is a rebranded CarveWright made by LHR Technologies Inc.

The CompuCarve is ...
By: Phishboy26. on 14 Dec 07, 06:15:52
The CompuCarve is made by Sears Craftsman. Who makes this one?

WOODWORKING - Part - Adjustable Shelves1
Posted by: InTheWorkshop

Video duration: 550 seconds
Global video hits: 7127/div

Charles Neil demonstrates a technique for making adjustable shelves in furniture and cabinetry. woodworking, woodworking, woodworking, woodworking, woodworking, woodworking, woodworking, woodworking, woodworking, woodworking, woodworking, woodworking, woodworking, woodworking

Related: woodworking, woodworker, charles, neil, in, the, workshop, video

Display Video Comments | Hide Video Comments | Add Comment

WOODWORKING - Remove a Dent from Wood
Posted by: InTheWorkshop

Video duration: 272 seconds
Global video hits: 23802/div

In this short video, Charles Neil shares a tip about getting dents from misplaced hammers and clamps out of the wood. Woodworking is all about the details so it is important that these dents be removed during the sanding process. Happy Woodworking and BE SAFE!!!! woodworking, woodworking,...

Related: wood, woodworking, woodworker, charles, neil, intheworkshop

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

cheers for the vid
By: ratutevita. on 08 Mar 10, 09:13:53
cheers for the vid

that alcohol method ...
By: ged201187. on 02 Mar 10, 02:32:09
that alcohol method is great to know thanks charles!

usually steam ...
By: InTheWorkshop. on 18 Feb 10, 15:03:11
usually steam doesnt work thru a finish , but try using a sharp razor blade , make a clean slice on the dent to break thru the finish, then apply hot water , sometimes it will seep thru the cut and swell the dent out , you could also try a little steam, but go easy or you can damage the finish, when done a quick coat of wax will hide the cut, other wise just sand it down steam the dent and refinish, I wouldnt replace ,

Any suggestions for ...
By: vpbubbies. on 18 Feb 10, 14:58:40
Any suggestions for "stained" stair treads, (Oak). Very small dents, 1/8" deep @ Max. But Home owner is an ass requests entire staircase be replaced due to 4 small dents not visible from a standing position. (dam people!). Any advice? Will steam work through a stained and varathaned/laquered finish?

Excellent , I had ...
By: johnthehappyguy. on 25 Nov 09, 12:51:59
Excellent , I had not heard of the alcohol method before. Thanks very much.

Excellent Thanks
By: Kompleteorisyeni. on 14 Oct 09, 13:09:33
Excellent Thanks

i like your tool ...
By: dirtrider1155. on 15 Aug 09, 03:05:07
i like your tool box my grandfather made one like it.

Clever
By: Aprenticewoodspoiler. on 22 Feb 09, 19:24:22
Clever

I am new to your ...
By: pedusJr. on 08 Jan 09, 23:45:23
I am new to your posts. I have been woodworking for almost 7 years. I do a distressing on the wood that adds dents, we actually hit it with a chain so the wood looks as though it is an antique. very cool tricks this will come in handy when i need to do a fine finish piece. Also does this work on hard woods as well as soft woods?

nice syrup!
By: kettlefish5. on 05 Dec 08, 17:28:42
nice syrup!

Thanks for sharing ...
By: AndreaGanora. on 21 Aug 08, 00:54:08
Thanks for sharing this nice working tips. keep up the good work

Wonderful ...
By: mjrns. on 12 May 08, 15:30:23
Wonderful contribution. Excellent information. Keep up the good work!!

well i agree with ...
By: MesaLX666. on 18 Mar 08, 00:28:31
well i agree with that and thats why i said there completely different ... to add a counter example, you cant raise a dent from metal like you can wood ... but to be honest i dont know that much about working with wood

sometimes when u ...
By: j2r262. on 16 Mar 08, 22:22:27
sometimes when u make a mistake with mettale u can fill it in with a weald or weald on anouther pice but i dont no that mutch about working with metal u cant realy do that with wood i my salf prefer wood

no .. 2 completely ...
By: MesaLX666. on 13 Mar 08, 22:40:43
no .. 2 completely different beasts ... because some types of metal doesn't cut so easy + metal has a tendency to "Gawl" up and its very hard to make it look really nice and professional.

working with wood ...
By: j2r262. on 26 Feb 08, 18:48:31
working with wood is a lot harder than metal

nice work! Man, I ...
By: 1ToNJaB. on 18 Jan 08, 02:31:20
nice work! Man, I wanna learn woodworking... I mostly work with Steel and Aluminum. Anyone wanna trade jobs for a year? haha!

A snipe is wood ...
By: InTheWorkshop. on 20 Dec 07, 14:09:44
A snipe is wood removed as is a chip, this raises dents, compressed wood, it doesn't replace wood. It would not work on a snipe, I wish it would!!!!!

great information, ...
By: Carlwoodworker. on 20 Dec 07, 07:48:39
great information,will this work on snipe? or would that be to much wood to raise?

WOODWORKING - Cutting Board Finishes
Posted by: InTheWorkshop

Video duration: 538 seconds
Global video hits: 8637/div

Charles Neil shows you what he uses to finish cutting boards and why. In the woodworking world there is always a big discussion, Charles explains his point of view and why. Happy Woodoworking and Be Safe Woodworking, woodworking, woodworking, woodworking, woodworking, woodworking

Related: wood, woodworking, woodworker, charles, neil, intheworkshop

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

yea thats what I ...
By: fenderpaman16. on 16 Feb 10, 04:25:22
yea thats what I thought but Im making one out of an old log by ripping it down planing sanding it and sealing it and setting it around on my bar as a decoration

white oak isnt too ...
By: InTheWorkshop. on 15 Feb 10, 14:12:49
white oak isnt too bad, but open grain woods like oaks and ash , leave alot of deep grain for "food " stuff to become trapped in, I prefer closed grain woods like maple and cherry

is oak a bad idea ...
By: fenderpaman16. on 15 Feb 10, 05:54:07
is oak a bad idea for a cutting board?

good choice on the ...
By: InTheWorkshop. on 19 Oct 09, 15:50:47
good choice on the wood, I respectfully disagree on the finishes...they provide no real protection, but are food safe....however evry known clear finish is food safe after it has cured...typically about 2 weeks.and provide protection and seal the wood from absorbing food liquids...mineral oil and wax do not....give it a test...

Best choice for ...
By: xj14y. on 19 Oct 09, 15:44:48
Best choice for food contact is maple. Rock maple is the gold standard. Non-toxic and I have not heard of allergy issues, which something like cherry or walnut may cause. But also, we are talking about food contact, it's not a cooking vessel. The amount of a proper hardwood you get into your cooked product is minuscule. Mineral oil and/or beeswax to finish.

great information ...
By: harddogwood. on 08 Apr 08, 01:33:07
great information for a new guy like me. love you vids.

Great Video Mr Neil ...
By: hankcampbell. on 25 Mar 08, 15:38:51
Great Video Mr Neil !!!

Do a google search ...
By: bbawy. on 13 Jan 08, 13:09:24
Do a google search for wood toxicity chart and you will get lots of info.

you are more than ...
By: InTheWorkshop. on 08 Jan 08, 02:07:20
you are more than welcome my friend,just trying to keep folks from tripping over the same rocks we have, thanks for your input

Thanks for posting ...
By: nebulaaah. on 08 Jan 08, 02:00:25
Thanks for posting these clips on youtube Mr. Neil. I'm studying woodworking in England and some of your techniques are very helpfull.

There must be ...
By: nebulaaah. on 08 Jan 08, 01:58:39
There must be somewhere. I get my info from a book, 'Carpentry and Joinery', by Peter Brett...

None of that sounds ...
By: slaintedan. on 07 Jan 08, 17:56:14
None of that sounds good. Is there a website that discusses the health concerns of each species?

Wenge can effect ...
By: nebulaaah. on 07 Jan 08, 17:24:20
Wenge can effect the central nervous system if the dust is inhaled. It can also cause dermatitis and any splinters present a risk of going septic. Ebony can also cause dermatitis, plus mucus membrane irritation. Padouk can irritate the eyes and throat, causing vomiting.

I'm building it to ...
By: slaintedan. on 02 Jan 08, 22:20:47
I'm building it to coordinate with my mid-century modern decor, which is mostly walnut, teak, and rosewood. I guess maple could be stained dark, but it would be nice to use walnut, teak, or rosewood. Maybe wenge, cocobola, ebony, padouk, etc. Is there a website that lists "toxic" hardwoods? I'd like to know which are more dangerous if consumed.

I like something ...
By: InTheWorkshop. on 02 Jan 08, 22:08:30
I like something like a simple hard maple,its hard and pretty nontoxic,its hard enough to discourage too much chewing

Thank you! Are ...
By: slaintedan. on 02 Jan 08, 18:44:08
Thank you! Are there particular species of wood that are more harmful to dogs if eaten? Sometimes puppies like to chew...

Put about 3 or 4 ...
By: InTheWorkshop. on 02 Jan 08, 18:36:37
Put about 3 or 4 coats of general finishes Arm-r-seal and you'll be good to go. Woodcraft and Rockler both carry it. Let it dry 3 or 4 days, don't let the dog eat the walnut, it has a tendency to be a little toxic, better safe than sorry.

Mr. Neil, I'm ...
By: slaintedan. on 02 Jan 08, 18:32:13
Mr. Neil, I'm making a simple food and water bowl stand for my dog that is basically a plank of wood with 4 legs and 2 holes cut to hold the stainless steel bowls. The stand is made of walnut and I need a durable, waterproof, food safe finish for it. What would you recommend?

WOODWORKING - Glue Line Ripping
Posted by: InTheWorkshop

Video duration: 583 seconds
Global video hits: 24798/div

Woodworking is a great hobby or profession. Woodworking tips from Charles Neil feature tips that he offers from his life-long woodworking experience. Woodworking is all about working wood and taking it from its natural, rough state to something you can be proud of. Charles Neil's videos...

Related: woodworking, woodworker, charles, neil

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

That was a great ...
By: malcolmclark2001. on 11 Mar 10, 00:29:13
That was a great solution. I use lots of scrap wood from a boat shop and I rarely get straight wood, seems the cut off is from curve cuts. Now finally I have a solution, which seems so simple now that I have seen it. Thanks also for touching on the safety side of ripping on the table saw. I have had those spears of wood shoot at me before and it makes a person a little jumpy. Thanks.

Great stuff. I am ...
By: pedusJr. on 08 Jan 09, 23:49:22
Great stuff. I am very impressed.

I think that may ...
By: Crunchified. on 06 Jan 09, 19:20:41
I think that may just be the sound out of sync... Otherwise, great stuff as usual, Mr. Neil : )

Great instruction, ...
By: zenhogtube. on 31 Dec 08, 23:30:17
Great instruction, thanks. Tell your camera man to quit tripping over stuff and making all that background noise.

Video was done for ...
By: InTheWorkshop. on 10 Apr 08, 22:18:57
Video was done for those who do not have a jointer,or a severe situation

Once you got your ...
By: nowthatsit. on 10 Apr 08, 21:51:24
Once you got your first "straight" edge, why not go to the joiner and continue to work on that same edge, then back to the table saw to cut to your board to dimension plus a 1/16" then back to the joiner to work the second edge bringing the board to final dimension. Of course you will leave it heavy, to sand it in. That is assuming you already visited the planer before even putting it across the table saw. Seems like less waste and danger to me.

Yes Charles... You ...
By: Chordwayze. on 11 Mar 08, 20:53:09
Yes Charles... You are right... Then sometimes a different browser works! I tell you you could fit my shop in one corner of yours and you'd think you had a new sheet material rack! Thanks my friend. Useful tech.. John

Hey chord, does ...
By: InTheWorkshop. on 11 Mar 08, 20:23:03
Hey chord, does this to me sometimes as well, try allowing it to load completely before watching, pain, but sometimes it is the only way.

Video keeps ...
By: Chordwayze. on 11 Mar 08, 19:50:02
Video keeps stopping... Aggravating. Youtube sucks again

why not limit the ...
By: shutupjackass. on 15 Dec 07, 06:50:09
why not limit the amount of passes and attach a straight edge with a slight overhang. One pass straightens one side, then take jig off flip and cut the otherside.

Hey Charles, that ...
By: FreidaKirkland. on 23 Sep 07, 15:14:53
Hey Charles, that is some awesome info - I've had to teach myself to woodwork and it's been tough to say the least. I live where there's no one around to help show me things and I've found your videos INVALUABLE!!! Thanks so much for helping me to check my squares, a better way for drawer slides, and now, ripping great glue lines - you're awesome! Keep up the great videos = Freida

This is some good ...
By: Parker307. on 16 Sep 07, 04:30:17
This is some good stuff. You can see that he is total set up for this with the offcut bin, the roller outfeed and of course the jig. It makes total sense to have a rough blade and come back with a sharper cleaner blade to get the best cut. He, Charles doesn't need a jointer because you can get a good glue edge from a table saw. The board that was being cut was pretty flat. He would likly use a jointer and/or planer if the board was seriously tiwsted.

normally a jointer ...
By: InTheWorkshop. on 05 Sep 07, 17:24:54
normally a jointer would do well,this is an exception, we just wanted to give guys with no jointer a way to straight line,hey thanks for your comments,

Yeah you're right ...
By: killersoundz. on 05 Sep 07, 17:15:00
Yeah you're right that would have to be one long ass jointer. :)

Yeah I meant a ...
By: killersoundz. on 05 Sep 07, 17:14:19
Yeah I meant a jointer, not a planar..

planer or jointer, ...
By: InTheWorkshop. on 05 Sep 07, 15:41:00
planer or jointer,this piece doesnt have a decent edge to even use a jointer on unless its a large one and alot of guys dont have jointers at all

Hey Charles, what ...
By: killersoundz. on 05 Sep 07, 06:22:37
Hey Charles, what about using a planar to straighten out that board?

this is better then ...
By: kksw9. on 01 Sep 07, 16:53:58
this is better then watching Norm!

Thank you for this ...
By: LombardChipper. on 14 Aug 07, 01:57:01
Thank you for this video. That looks like a nice and simple Jig to make. I usually don't need boards that long but if I do now I know how to make them straight.

Woodworking : How to Engrave Letters Into Wood
Posted by: eHow

Video duration: 92 seconds
Global video hits: 5384/div

In order to engrave letters into wood, a woodworker will need a very small router with a 1/4 inch routing footing bit. Find out how to do free-hand routing to engrave letters into wood with help from a woodworker and antique restorer in this free video on woodworking. Expert: Curtis Martin...

Related: woodworking, tools, plans, carving, wood, lathe, routers, shapers, projects, information

Display Video Comments | Hide Video Comments | Add Comment

Experience Woodworking - Shaker Rocking Chair Class
Posted by: McLaughlinWoods

Video duration: 120 seconds
Global video hits: 4911/div

Mr. Peter Hindle, a woodworking instructor from England, came to our shop in Canterbury, NH to teach a class of students how to make a classic Shaker Rocking Chair. You too can learn to build one. Visit www.experiencewoodwo rking.com.

Related: shaker, rocking, chair, woodworking, class, instruction, mclaughlin, experiencewoodworking, hack

Display Video Comments | Hide Video Comments | Add Comment

Woodworking 101 -- Cutting Boards
Posted by: WoodworkersUSA

Video duration: 314 seconds
Global video hits: 32505/div

Shopsmith and woodcraftplans.com present a brief video on making a solid wood cutting board. It's a simple project and you newbies are sure to pick up some general tips about basic woodworking machines, what they do, and how they work. www.shopsmith.com / www.woodcraftplans.c om

Related: woodworking, wood, working, woodworker, woodworkers, wooden

Display Video Comments | Hide Video Comments | Add Comment

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

WoodWorkingVideos

Watching: Woodworker video compilations

Search

WoodWorking Related Videos

WoodWorking Sponsors

Social Bookmarking

WoodWorking Videos